Mast : GOLIATH WD 970
HIGH MODULUS CARBON MAST / THE ULTIMATE RIGIDITY
The Goliath WD 970 mast has been designed exclusively for WindSurf Foil practice.
Thin symmetrical profile/Identical to the best SELECT fins (low stall sensitivity).
The Goliath WD 970 mast is straighter than the PROfoil.F1. The mast/fuselage angle is 90°, allowing the position of the mast on the fuselage to be set back. The root of the front wing becomes further forward in relation to the mast.
This technical option generates greater power from the front wing and a more pronounced spin hold for greater control.
Features :
– Height under hull : 96,5 cm
– Board mount : Deep Tuttle full carbon + removable full carbon plate.
The support plate provides precise wedging while supporting 35% of lateral forces (Limiting the breakage of board boxes).
Rake :
3 available angles : 1.7° / 2.5° / or 3° (Plate-adjusted).
– Plate 1.7° (For 1st generation boards).
– Plate 2.5° or 3 (For post-2021 boards).
Hydrodynamic :
Thin symmetrical profile/Identical to the best SELECT fins (low stall sensitivity).
The GOLIATH WD 970 mast is straighter than the PROfoil.F1.
The mast/fuselage angle is 90°, allowing the position of the mast on the fuselage to be set back.
The root of the front wing becomes further forward in relation to the mast.
This technical option generates greater power from the front wing and a more pronounced spin hold for greater control.
Technology :
Full carbon prepreg HM (high-modulus) + autoclave.
Reinforced high-modulus carbon structure (The ultimate in stiffness and strength).
Sandwich-free construction for maximum strength.
Finish :
Hand-sanded surfaces (Gr.1200) for perfect glide. No varnish